Sales: (02) 4655 5575   Service & Spares: (02) 4655 8858   info@macmm.com.au   16A Argyle St Camden NSW 2570   Trading Hours: Click Here
Signature Elite Dealer Husqvarna Dealer
Zoom image

Crommelins T418DS 18 Inch Trencher With 6.0hp Subaru EX17 Engine

In stock (1 item available)
  • $6599.00AUD
Qty:  

Crommelins T418DS 18 Inch Trencher With 6.0hp Subaru EX17 Engine

The 18" Groundhog Trencher is easy to use and operator propelled to offer controlled digging straight to the exact depth with an absolute minimum of effort.

Very popular with the NBN Contractors due to its witdh (610mm) it can fit through narrow gates and doorways and trenches close to walls and fences.

Suitable for a wide variety of ground, including sand, lawn, clay, gravel, road base and and comes complete with the heavy duty ‘Shark Tooth’ chain made from carbide tipped rock type bits and is fully replaceable.

The side cleaning auger stops material falling back into the trench. This saves precious clean up time, important for contractors who want to move onto the next job as soon as possible.

The Groundhog uses Shark Tooth chain with replaceable carbide-tipped bits and will dig a 3" (75mm) wide trench to depths of 8", 12" & 18" (200, 300, 450mm) easily and quickly.

The Groundhog trencher also comes equipped with a rollers that will significantly increased the life of the trencher digging chain while decreasing the risk of chain breaks. The chain rollers ride on the centre wheel of the roller while the side plates of the chain are guided by the wheel shoulders. In testing, sprocket jamming situations that would normally cause chain breaks were eliminated when using the roller.

Note: Upgraded this model has been upgraded to use a 6.0hp Subaru engine (from 5.0hp)  

Model Number   T418DS
Engine Make   Subaru
Engine   6.0hp EX17
Engine Features   Donaldson air cleaner, centrifugal clutch
Starting System   Recoil Start
Fuel Type   Petrol
Fuel Tank (L)   3.8L
Noise Level (dB @ 7m)   69db
Operation Width (mm)   3\" (75mm)
Weight (kg)   110kg
Dimensions (LxWxH)   610mm width
Package (LxWxH)   1.6 x 0.8 x 1.2
Manufacturers Warranty   12 months
Engine Warranty   3 years
Operational Depth   18\" (450mm)

 

Features

  • Shark tooth chain
  • Digging chain guard
  • 18x replaceable carbide tipped hardened steel teeth rotate as they cut, ensuring a clean finish
  • Solid roller digging chain for increased life
  • Side deliver auger
  • Wide pneumatic tyres with tubes
  • Centrifugal clutch with all metal shoes and drum, needle bearing equipped
  • 3x Cutting depths - 8", 12" & 18" (200, 300, 450mm)
  • Heavy duty steel frame
  • Heavy duty lift hook
  • Durable powder coating
  • Up to 2.5 to 3m (8-10Fft) per minute productivity

Applications

  • NBN Cabling
  • Plumbing
  • Drainage
  • Reticulation
  • Fencing
  • Non electrical cabling

Industry

  • NBN Contractors
  • Hire
  • Councils
  • Government departments
  • DIYers

Not rated yet
No reviews.
  • Weight
    120.0000 kg
  • SKU
    T418DS